|
EM-4D |
EM-4E/MSD*
triggers Multispark |
EM-4F |
| Basic EFI Kit 4 cyl. |
$841 |
$1007 |
$1249** |
| Basic EFI Kit 6 cyl. |
$874 |
$1056* |
$1414 |
| Basic EFI Kit 8 cyl. |
$927 |
$1136* |
N/A |
| Mazda (2 rotor) |
$841 |
N/A |
N/A |
*EM-4E without ignition coil, coil
driver, coil bracket. You must have one of the popular ignition boxes,
such as MSD, Crane etc.and a coil.
S.D.S. controls igniton timing by triggering the points wire. |
**EM-4 4F version is
available without coils. Intended to drive OE coil packs. Price
$1179US.
EM-4 4F version is also available to drive MSD DIS-2 box. DIS-2 not
included. Price $1093US. |
| With Optional Knock Sensing (E & F systems only) |
$100 |
| Optional Fuel Pump Relay |
$30 |
| Optional Fast Idle |
$80 |
| Optional RPM Switch Control |
$30 |
| Optional Electric Fan Control |
$30 |
| Optional Supercharger Clutch Control Toyota 4AGZ |
$30 |
| MAP Sensor 1 Bar Abs(for normally aspirated) |
$64 |
| MAP Sensor 2 Bar Abs(up to 15 psi boost) |
$75 |
| MAP Sensor 3 Bar Abs(up to 30 psi boost) |
$90 |
| TPS Kit 5/16 D Shaft Drive (specify
CW or CCW TPS end shaft rotation)
photo |
$75 |
| Optional Dale 1/8 NPT Temp Sensors |
$20 |
| Optional Bosch 12X1.5mm Temp Sensors |
$30 |
| Optional Bosch CHT Temp Sensor for Air Cooled Engines |
15 |
| Mixture Meter without Sensor
photo |
$78 |
| Mixture Meter with Unheated Sensor and Boss |
$126 |
| Mixture Meter with Heated Sensor and Boss |
$142 |
| Large Bosch Pump to 600 hp
photo |
$280 |
| Small Bosch Pump to 300 hp
photo |
$240 |
| Bosch 13 Ohm Injectors, 300cc, Domestic O-rings, disc
photo |
$65 |
| Bosch 13 Ohm Injectors, 420cc, Domestic O-rings, disc
photo |
$80 |
| Siemens 2.5 Ohm Injectors, 570cc, Domestic O-rings |
$90 |
| |
|
|
|
| Extra Injector Controller, includes injector harness |
$349-379 |
| New style steel base injector boss for EIC or manifold
mount.Photo
more info |
$35 |
| New style aluminum base injector boss for EIC or
manifold mount. Photo
more info |
$35 |
| Old style aluminum injector boss. For use with fuel
rail hold down only. Limited supply.Photo |
$5 |
| Old style steel injector boss. For use with fuel rail
hold down only. Limited supply.Photo |
$5 |
| Unheated, 1 wire O2 sensor |
$43 |
| Heated, 4 wire O2 sensor |
$64 |
| Backlit LCD programmer option. Add backlit display
only. Not complete programmer. |
$50 |
| Custom wiring harness lengths |
$30 |
| WMS wideband mixture meter |
$399 |
| |
| Please note that basic kit prices
do not include fuel hardware such as injectors, pumps, regulators etc. |
We do not recommend fuel pressures
exceeding 60 psi with our injectors.
Injectors carry no manufacturer's warranty.
|
| All prices in U.S. dollars.
|
| |
|
|
|
Other prices available on request.
SDS engine management systems are intended for performance and special
applications. Installation may void warranties and emission
compliance. Since SDS is user programmable, the user assumes full
responsibility for any engine damage. For use on non-certified
aircraft only. No returns are accepted after 30 days and ALL returns
are subject to a 20% restocking charge.
|
